Choosing the correct aluminum sheet thickness is very important in manufacturing, 製造, and procurement. A small mistake in gauge selection can lead to structural failure, excessive cost, processing difficulties, or product rejection.
an aluminum gauge thickness chart provides a standardized, reliable reference that links gauge numbers to exact thickness values in inches and millimeters. This guide explains how the aluminum gauge system works, how to use it correctly, how it compares with steel gauge charts, and how professionals can select the optimal thickness for real-world applications.
Whether you are an engineer designing parts, a buyer sourcing materials, or a manufacturer optimizing production, this article gives you a complete, practical framework for accurate gauge selection.
重要なポイント
Aluminum gauge numbers represent sheet thickness, しかし higher gauge = thinner sheet
アルミニウム uses a different gauge system than steel
Always verify thickness using decimal values (inches or millimeters)
International standards (ASTM, ISO, 彼はそうです) ensure consistency and compliance
Proper gauge selection improves product quality, コストを削減します, and prevents rework
Supplier consultation is essential when gauges or tolerances are critical
What Is Aluminum Sheet Gauge?
an aluminum sheet gauge is a numerical system used to describe the thickness of aluminum sheets. Unlike direct thickness measurements, gauge numbers are not linear—each number corresponds to a predefined thickness value.
Key characteristics of the aluminum gauge system:
Lower gauge number = thicker aluminum
Higher gauge number = thinner aluminum
Typical aluminum sheet gauge range: 8 gauge to 30 ゲージ
Gauge thickness is commonly converted to:
Inches (で)
Millimeters (んん)
例えば:
10 gauge aluminum is much thicker than 20 gauge aluminum
The same gauge number means different thicknesses for aluminum and steel
このため, gauge numbers alone should never be used without referencing an aluminum gauge thickness chart.
How the Sheet Metal Gauge System Works for Aluminum
The sheet metal gauge system originated from historical manufacturing practices and was later standardized. アルミ用, each gauge corresponds to a specific thickness, independent of alloy type.
Important principles:
Gauge numbers do ない represent weight or strength directly
Gauge-to-thickness relationships are fixed by standard charts
Mechanical strength depends on:
厚さ
合金 (例えば, 6061, 5052, 7075)
気性 (○, H, T conditions)
When precision matters—as it does in aerospace, 電気, 自動車, and industrial fabrication—engineers rely on decimal thickness, not gauge numbers alone.
How to Use an Aluminum Gauge Thickness Chart
An aluminum gauge thickness chart is a practical decision-making tool used throughout design, sourcing, そして生産.
Step-by-Step Usage
Define project requirements
Load-bearing needs
Bending or forming requirements
Environmental exposure
Cost constraints
Identify required thickness
Use engineering calculations or standards
Determine minimum acceptable thickness
Convert thickness to gauge
Use the aluminum gauge thickness chart
Confirm thickness in inches or millimeters
Compare materials
Aluminum vs. スチール対. ステンレス鋼
Weight and corrosion considerations
Confirm with supplier
Verify availability
Confirm tolerances
Avoid non-standard gauges if possible
Using the chart early prevents redesigns, 遅延, and unnecessary material cost.
Aluminum Thickness–Based International Standards
Aluminum sheet thickness is governed by internationally recognized standards that define allowable tolerances, 材料特性, and dimensional accuracy.
Major Standards You Should Know
| 標準 | 地域 | 範囲 |
| ASTM B209 | United States | Aluminum sheet and plate thickness tolerances |
| ISO | International | Global manufacturing and quality standards |
| 彼はそうです | 日本 | Aluminum sheet sizes and tolerances |
| ANSI H35 | アメリカ合衆国 | Aluminum alloy and dimensional specifications |
These standards ensure:
Interchangeability between suppliers
Reliable mechanical performance
Compliance with regulatory and customer requirements
Always verify that your aluminum sheets meet the latest version of the applicable standard, as tolerances are periodically updated.
How to Check the Gauge of an Aluminum Sheet
Gauge charts are references—but physical measurement is mandatory for quality control.
Recommended Measurement Methods
Digital calipers
高精度
Suitable for engineering and inspection
マイクロメートル
Best for thin gauges
Extremely precise
Gauge wheels
Fast checks
Lower accuracy than calipers
Avoid using tape measures or rulers—they are not suitable for gauge verification.
Modern industrial thickness gauges now offer:
Alloy-independent measurement
高精度 (±1.5 μm)
Resistance to coolant, スチーム, そしてほこり
Minimal maintenance requirements
Aluminum Gauge Thickness Chart
定義と目的
An aluminum gauge thickness chart links gauge numbers to exact thickness values. It is used to:
Select appropriate sheet thickness
Verify supplier specifications
Estimate material cost and weight
Support design and manufacturing decisions
Standard Aluminum Gauge Thickness Table
| Gauge | 厚さ (で) | 厚さ (んん) |
| 30 | 0.0100 | 0.25 |
| 28 | 0.0126 | 0.32 |
| 26 | 0.0159 | 0.40 |
| 24 | 0.0201 | 0.51 |
| 22 | 0.0253 | 0.64 |
| 20 | 0.0320 | 0.81 |
| 18 | 0.0403 | 1.02 |
| 16 | 0.0508 | 1.29 |
| 14 | 0.0641 | 1.63 |
| 12 | 0.0808 | 2.05 |
| 10 | 0.1019 | 2.59 |
| 7 | 0.1443 | 3.67 |
Importance for Professionals
Engineers and manufacturers use gauge charts to:
Select thickness for bending, スタンピング, そして溶接
Translate gauge values into CAD drawings
Compare aluminum with steel alternatives
Optimize material usage and cost
Different alloys behave differently at the same thickness:
| 合金 | 特徴 | 代表的なアプリケーション |
| 6061 | Balanced strength and machinability | 構造的, 航空宇宙 |
| 5052 | 優れた耐食性 | マリン, エンクロージャ |
| 7075 | 非常に高い強度 | 航空宇宙, 防衛 |
Gauge Thickness Chart Comparison
Aluminum vs. Steel Gauge Thickness
Gauge numbers are not universal across metals.
例:
| Gauge | Steel Thickness (で) | Aluminum Thickness (で) |
| 10 | 0.135 | 0.102 |
Steel is significantly thicker at the same gauge number. Using the wrong chart can lead to:
Excessive weight
Overdesign
Increased cost
Processing difficulties
How to Read the Chart Correctly
Always select the correct material chart
Confirm thickness in inches or millimeters
Use decimal thickness for cross-material comparison
Reference regional standards when required
Manufacturing Uses and Benefits
Industry Standards and Compliance
Using the correct aluminum gauge thickness helps ensure compliance with:
ASTM B209
Customer drawings and specifications
Internal quality control systems
Compliance reduces rejection rates and builds long-term supplier trust.
Process Optimization and Cost Control
Correct gauge selection improves:
Cutting efficiency
Forming accuracy
Welding quality
Shipping cost control
| Gauge Range | 一般的な用途 | 利点 |
| 10–16 | 構造的, 航空宇宙 | 高強度 |
| 18–22 | エンクロージャー, パネル | Weight reduction |
| 24–30 | 包装, カバー | Low material cost |
Incorrect gauge choices can increase costs by 30–50% due to scrap and rework.
Gauge Selection Guide
Project Requirements
Evaluate:
Load and strength needs
Environmental exposure
Weight limitations
Cost targets
Fabrication methods
Matching Specifications
Use decimal thickness in drawings
Verify thickness with calipers
Align material with design intent
Comparing Materials
| 材料 | 10 Gauge Thickness (で) | 典型的な使用 |
| アルミニウム | 0.102 | Lightweight panels |
| 鋼鉄 | 0.135 | Heavy structural parts |
Decimal thickness avoids confusion across materials.
Supplier Consultation
Before finalizing designs:
Confirm stock gauges
Ask about tolerances
Verify lead times
Discuss custom thickness availability
Step-by-Step Gauge Selection
Define requirements
Use aluminum gauge chart
Convert to decimal thickness
Verify with measurement tools
Confirm supplier availability
Finalize order
What If the Required Thickness Is Not Listed?
Order custom thickness
Adjust design
Specify decimal thickness instead of gauge
Flexibility prevents delays and cost overruns.
アプリケーション
製造
| Gauge | 厚さ (んん) | 応用 |
| 12 | 2.05 | Heavy frames |
| 14 | 1.63 | エンクロージャー |
| 16 | 1.29 | Cabinets |
Procurement
Gauge affects availability and price
Non-standard gauges increase lead time
Decimal thickness improves sourcing accuracy
品質管理
Thickness measurement
Alloy verification
Surface inspection
Documentation review
よくある質問
What is sheet metal gauge and why does it matter?
Gauge defines thickness, which directly affects strength, 重さ, そしてパフォーマンス.
How does gauge affect strength?
Lower gauge (thicker sheet) generally provides higher load capacity.
Why do aluminum and steel use different gauge charts?
Each metal has its own historical and standardized thickness definitions.
How do you verify gauge accuracy?
Measure with calipers and compare to the aluminum gauge chart.
What if the required gauge is unavailable?
Use decimal thickness or consult suppliers for alternatives.
結論
An aluminum gauge thickness chart is not just a reference—it is a critical decision-making tool. By understanding gauge systems, 基準, and measurement methods, engineers and buyers can avoid costly mistakes, improve product quality, and streamline manufacturing.
For best results:
Always use decimal thickness
Follow international standards
Measure before fabrication
Work closely with qualified suppliers
Accurate gauge selection leads to reliable performance, 低コスト, and successful projects.
