Procurar
Cardápio

Mild Steel Machining

  • Experiência em Materiais: We work on familiar mild steels such as 1018, 1045, and 12L14, and optimize tools and machining plans.
  • Precise Machining:(± 0,01 mm) Tolerances achievable by applying multi-axis CNC machining and precision tool control.
  • Excellent Surface Finishes: Get a smooth finish or matted texture to get the best welding, pintura, revestimento, or assembling experience.
  • Full Service: DFM consulting through to secondary welding work and plating, we are behind your project.

Envie sua pergunta hoje

    Orçamento de peças personalizadas

    Na TOPS Precision, our mild steel machining capabilities help fulfill industrial and commercial parts requirements. Como resultado, our factory uses complex CNC milling, girando, and milling practices to generate high-quality and durable mild steel components smoothly and economically. In prototyping or when taking the step into small runs and up to large-scale output, we provide outstanding dimensional accuracy and repeatability. Characteristic features of our Mild Steel Machining Services are;

    What is Mild Steel CNC machining?

    Mild steel CNC machining is the application of computerized equipment to produce parts by milling, girando, perfuração, or tapping low-carbon steel alloys (usually less than 0.25% carbono). It achieves a combination of precision tooling and material-specific parameters to provide fabricable, economical, and trustworthy parts. These industries can be construction, automação, and machine building.

    Envie sua pergunta hoje

      Orçamento de peças personalizadas

      Properties of Mild Steel Material

      Mild steel grades come with special features, maquinabilidade, and treatability. A brief listing of the flavor of the day with the most important mechanical properties:

      1. Resistência à tracção

      Mild steel has moderate tensile strength, ou seja, 370 para 570 megapascals. This value depends on the grade. This enables it to resist high stretching or pulling loads. It can fail at high stretches or pull forces, and it is suitable as a structural frame, shaft, and load-bearing component, where bending stiffness and strength are important factors.

      2. Força de rendimento

      The yield strengths of mild steel vary between 250 MPa (A36) e 415 MPa (104,5). além disso, the metal holds its shape at pressures until a point when a critical load is attained. That implies that it can withstand a large amount of stress without permanent deformation. Por isso, it is essential in parts such as gears, colchetes, e fixadores.

      3. Ductilidade

      Mild steel is also very ductile, enabling it to be easily drawn, bent, or stretched due to its ductility. This is suitable for forming, rolando, and stamping operations. It is also very ductile with high weldability and has less chance of material failure under dynamic and impact loads.

      4. Maquinabilidade

      Mild steel machines with ease in grades 12L14 and EN1A, where the former is commonly used in the leaded grades and the latter has much less wear of tools. This property minimizes the time and cost of production, making the material of choice for precision-turned parts, acessórios, as well as large-scale CNC operations.

      5. Soldabilidade

      Mild steel has a low level of carbon content, thus making it weldable, utilizing different welding skills like MIG, TIG, and arc welding. Welds are generally tough and ductile with little chance of cracking and brittleness, which is significant in structural and constructed assemblies.

      6. Resistência ao Impacto

      Mild steel can absorb shock loads without fracturing because it is impact-resistant. This qualifies it as a dependable material in such dynamic places as construction machinery, Auto Peças, and mechanical linkages.

      7. Resistência à corrosão (Baixo)

      A drawback of mild steel is its comparatively low corrosion resistance. It can rust easily in the presence of moisture or hostile conditions unless painted, galvanized, or powder-coated. This disadvantage can be overcome using surface finishing.

      Envie sua pergunta hoje

        Orçamento de peças personalizadas

        Different Common Mild Steel Grades and Their Properties

        The following are the different grades and their properties of Mild Steel;

        Nota

        Resistência à tracção

        Força de rendimento

        Propriedades principais

        1018

        ~440 MPa

        ~370 MPa

        Versátil, cold-formed, facilmente soldável

        1020

        ~420 MPa

        ~350 MPa

        Difícil, moderately strong, easily machined

        1045

        ~570 MPa

        ~415MPa

        Medium carbon, mais forte, heat-treatable

        12L14

        ~440 MPa

        ~370 MPa

        High-speed machinability, Desgaste com baixa ferramenta

        A36

        ~400–550 MPa

        ~250 MPa

        General purpose, boa soldabilidade, structural use

        EN1A (1215)

        ~370 MPa

        ~280 MPa

        Ideal for CNC turning, ultra-fast machining, e tolerâncias apertadas

        4140

        Up to ~655 MPa (treated)

        ~415MPa

        Excellent fatigue strength, resistência ao desgaste, and impact toughness

        Envie sua pergunta hoje

          Orçamento de peças personalizadas

          Different CNC Processes of Mild Steel

          The machinability of mild steel means that nearly any CNC operation can be used to produce complex shapes, fine finishes, and close tolerances. The following are the most popular CNC approaches that are customized to provide precision mild steel parts:

          1. Fresagem CNC

          CNC milling is best suited for the shaping of flat surfaces, slots, bolsos, ts, and very complex 3D contours on mild steel. Top precision means that you have multi-axis milling machines that can be used to do operations at high speed and with an excellent degree of dimensional accuracy, e portanto, colchetes, recintos, as well as complex housings, can be produced by TOPS Precision.

          2. Torneamento CNC

          The machining is applied in the production of accurate cylindrical components like the shafts, alfinetes, e buchas. The CNC turning process starts with a rotating workpiece material, which is made of mild steel, with a fixed tool cutting away the material and allowing the machine to make smooth surfaces, concentric features, e tolerâncias apertadas.

          3. Perfuração & Tocando

          Holes of different sizes are formed by drilling, and internal threads are built by tapping. These are basics in the production of mild steel assembly components and may usually be utilized in fastener holes, threaded ports, and fluid passages of the mechanical assembly.

          4. Alargamento & Tedioso

          To ensure that the holes are drilled with high precision in applications, reaming and boring are used to finish holes with precise size and fine surface finishes. The methods are especially applicable in cars and mechanical-related products with high tolerance requirements in fit and alignment.

          5. Thread Milling and Thread Turning

          Both procedures help in the making of accurate, long-lasting threaded aspects. Thread milling is versatile; the tools are durable, and thread turning is effective with big or even deep cuts. The methods guarantee good mechanical locks and thread repeatability.

          6. Chamfering & Deburrendo

          Chamfering is then done after machining to provide angled surfaces to be assembled easily and deburring is used to clear edges and burrs. These final touches increase safety, make the part presentable, and make it ready to be coated or have other work done.

          Envie sua pergunta hoje

            Orçamento de peças personalizadas

            Types of Finish Available to Mild Steel Components

            Finishing plays a very important role in improving the durability, desempenho, and aesthetics of machined mild steel products. Defining the characteristics of different applications, TOPS Precision provides its customers with a variety of post-machining processes according to the specific industry needs and functional requirements.

            1. Oil/Water-Based Coolant Application

            Oil-based or water-based coolants can be used during and after machining to control the heat, minimize the generation of friction, and extend the tool’s life. The fluids can also help with the best finishes on surfaces as they wash away the chips and reduce thermal distortion, which is of utmost importance in precision on finer tolerance parts.

            2. Deburring Chamfering

            Deburring removes sharp edges, any residual burrs welded on the part, and tool marks and chamfering provides bevel edges on the part. They are necessary to prepare the components to be safely handled (using lubricants, excluding harmful substances, etc.), conveniently assembly-compatible (using a uniform assembly coating), and visually clean.

            3. Tratamento térmico

            Wear resistance and hardness of mild steel parts can be greatly enhanced by heat treatment, aquilo é, through induction or furnace hardening. It is particularly useful in the drive parts, cam, e ferramentas, which are flexed regularly with mechanical pressure. We also have specific heat treatments depending on the functional needs of the parts.

            4. Revestimentos & Surface Treatments

            Some of the available protective coatings proposed by TOPS consist of zinc plating, revestimento em pó & pintura, and even anodizing service (where suitable alloyed parts are involved). Such finishes reduce corrosion, increase the hardness of surfaces, improve looks, and prolong the service life of outdoor or harsh environment parts.

            5. Soldagem & Contrivance

            In assembled structures or those structures that are fabricated, we offer welding services that give strength and accuracy along with clean joints. Our fabrication design is such that whether you are manufacturing mild steel frames, recintos, and/or parts of machinery, the parts are welded within the required dimensions and mechanical specifications.

            Envie sua pergunta hoje

              Orçamento de peças personalizadas

              Advantages of mild steel machining

              Mild steel has an advantageous performance-cost-machinability combination; it is appropriate in the cases of prototypes as well as high-volume runs. Here are some of its pros;

              • Low Cost & Readily Available –Low cost and can be supplied consistently.
              • Good Machinability – The availability of a wide range of cutting tools and short cycle times.
              • Difícil & durável- Can withstand heavy-duty operations.
              • Acabamentos personalizados- provides welding, revestimento, and plating as necessary.
              • Scalable Manufacturing-Efficient both in small production and large carry-outs.

              Envie sua pergunta hoje

                Orçamento de peças personalizadas

                Design Guide for Mild Steel Machining

                Practical machining design and cost-effective manufacture require adherence to practical design principles that take into consideration the material properties of mild steel. Correct geometry, tolerância, and supports will also alleviate tool wear, part distortion, and a lasting part.

                Recurso

                Recommended Guideline

                Razão

                Espessura da Parede

                ≥ 2 mm

                Prevents warping and ensures part strength

                Filetes

                Internal radii ≥ 0.8 mm

                Reduces stress and tool wear

                Hole Design

                Depth ≤ 5× diameter

                Ensures drill stability and clean holes

                Rosqueamento

                Standard threads with relief grooves

                Improves tap life and thread quality

                Faixa de tolerância

                ±0.01 mm to ±0.05 mm

                Balances precision and cost

                Slot Width

                ≥ 3 mm (diâmetro da ferramenta)

                Prevents tool breakage and aids in chip removal

                Engraving/Marking

                Depth ≥ 0.5 mm, width ≥ 1.5 mm

                Improves visibility and durability

                Boss Height

                ≤ 3× boss diameter

                Maintains structural stability

                Envie sua pergunta hoje

                  Orçamento de peças personalizadas

                  Challenges to Mild Steel Machining

                  In spite of its versatility, mild steel has a few machine problems, which must be tactfully addressed.

                  • The buildup of heat – Needs to be well-cooled to prevent warping.
                  • Desgaste da ferramenta – Tool wear is a particular problem, particularly when using alloy grades or hardened grades.
                  • Burr Management– The risk of burr is high and should be removed.
                  • Rigidity Required – Good fixturing was necessary to hold still.
                  • Chip Disposal –Iron filings must be carefully removed and cleaned.

                  Envie sua pergunta hoje

                    Orçamento de peças personalizadas

                    Applications of Mild Steel Machining

                    The versatility, força, and cost-effectiveness of mild steel have made it an all-time favorite material across several industries. Its applications are wide-ranging, consistent in terms of structure, and involve making precision mechanical parts.

                    • Automotivo:colchetes, chassis, peças, peças de suspensão.
                    • Robotics and automation: rails, mounts, tooling fixtures.
                    • Electro-mechanical: war shafts, engrenagens, and other motor parts.
                    • Cladding:conectores, pratos, build-up structural units.
                    • Máquinas: câmeras, veios, ferramentas, e máquinas.

                    5 Tips on Saving Money in Mild Steel Machining

                    Cost-saving considerations can be used at the beginning of the design process and machining so that less wastage occurs and turnaround time is faster.

                    1. Proper Grade Selection – Where possible, use free-machining types.
                    2. Belt Simplicity in Geometry – the potential of wasting machining time in Geometry.
                    3. Pod or Batch Production – Decreases (por parte) set-up costs.
                    4. Use DFM Best Practices Early- Eliminates waste through trial and prototype.
                    5. Avoid excess finishing- Regular finishing is usually enough.

                    Envie sua pergunta hoje

                      Orçamento de peças personalizadas

                      Produce TOPS Precision Machined Mild Steel Parts

                      TOPS Precision incorporates a complete suite of CAD/CAM, usinagem, acabamento, and inspection in a single location. We supply high-quality prototypes to full production volumes of mild steel parts to your application needs, na hora certa, and on spec.

                      Send in your drawings now and have our engineers fully review them in terms of manufacturability and give you a quick price quote.

                      Our Service of Mild Steel Machining is Guaranteed

                      Each component is verified using a quality system ISO 9001. We will do the following:

                      • Strict tolerance parts as per your requirements
                      • Certification of material Traceable
                      • Timely on-time delivery, along with reporting of inspections
                      • Satisfaction guarantee and after-sales support

                      Envie sua pergunta hoje

                        Orçamento de peças personalizadas

                        Perguntas frequentes

                        A: +/- 0.01mm on simple geometry; +/- 0.02-0.05mm on multi-feature part.

                        A: Sim, we do machine-grade materials such as 4140 in an optimum manner using favorable tooling and processes.

                        A: Sim, stress-relief, hardening, temering, e assim por diante, and certified.

                        A: Sim, we can offer welding and fabrication on an as-required basis.

                        A: Sobre 5-7 days on prototypes, lead times on volumes vary.

                        A: ETAPA, IGES, Stl, DWG, Dxf- more of which can be contactable.

                        Let's Start A New Project Today

                        Envie sua pergunta hoje

                          Obter Cotação Imediata
                          Fechar
                          Comece a digitar para ver as postagens que você procura.